全国解决方案定制热线

陶氏反渗透膜HSRO-390-FF反渗透膜元件

作者:陶氏膜 来源:陶氏膜公司发布时间:2015-01-27 15:04:09

  陶氏反渗透膜HSRO-390-FF热消毒型反渗透膜元件产水水质好,能经受热水的消毒处理。由先进的全自动生产线生产的HSRO元件,具有膜工业界较高的有效膜面积,这一高膜面积允许系统设计成更低的运行通量或者保持相同通量使用较少的膜元件以节省系统成本。元件采用无外壳的full-fit的结构,消除了标准膜元件与压力容器内壁间的死水区,适用于有特殊卫生要求的应用场合。且所有的部件均符合FDA的标准。

陶氏反渗透膜HSRO-390-FF反渗透膜元件

陶氏反渗透膜HSRO-390-FF

  陶氏反渗透膜HSRO-390-FF操作极限

  膜片类型:聚酰胺复合膜

  最高操作温度:113°F(45°C)

  最高热消毒温度:(1.75bar,25psi)85°C

  最高运行压力:600psig(41.0bar)

  最大压降:15psig(1.0bar)

  pH范围,连续运行:a2–11

  pH范围,短期清洗(30分钟) :b1–12

  最大给水:SDI155

  允许游离氯含量:c<0.1ppm

陶氏反渗透膜HSRO-390-FF

  DOW FILMTEC HSRO-390-FF is a heat sanitizable reverse osmosis element that delivers exceptional quality water with the added capability to withstand sanitization with hot water. HSRO elements, manufactured on advanced automated equipment, have the highest active membrane area allowing system designs with either lower operating flux or cost savings from fewer membrane elements. The full-fit configuration minimizes stagnant areas and is an ideal choice for applications requiring a sanitary design. All components comply with U.S. Food & Drug Administration standards.

  Used In:

  Medical applications

  Sanitary uses

  Advantages:

  Heat sanitizable

  High flux rates

  Full-fit design

  Consistent quality from automated rolling

  FilmTec performance and quality

 

请点击下载:陶氏FILMTEC™ HSRO-390-FF产品技术手册