全国解决方案定制热线

陶氏反渗透膜RO-390-FF 反渗透膜元件

作者:陶氏膜 来源:陶氏膜公司发布时间:2015-01-27 15:11:36

  陶氏反渗透膜RO-390-FF是卫生级反渗透膜元件,产水量高、产水水质好。元件采用无外壳的fullfit的结构,消除了标准膜元件与压力容器内壁间的死水区,适用于有特殊卫生要求的应用场合,且所有的部件均符合FDA的标准。

陶氏反渗透膜RO-390-FF

陶氏反渗透膜RO-390-FF

  陶氏反渗透膜RO-390-FF操作极限条件

  膜片类型:聚酰胺复合膜

  最高操作温度:113°F(45°C)

  最高运行压力:600psig(41.0bar)

  最大压降:15psig(1.0bar)

  pH范围,连续运行:a3–10

  pH范围,短期清洗(30分钟):b1–12

  最大给水:SDI155

  最大给水浊度:NTU1

  正确的启动反渗透水处理系统,将膜元件投入运行并防止因过高的给水流量或水力冲击对膜元件的破坏十分重要的,遵从正确的启动步骤才能确保系统的操作参数符合设计规范,达到系统的产水水质和水量。在启动系统前,必须完成膜系统的预处理、膜元件的安装、仪表的校正和其它系统部位的检查。

  The DOW FILMTEC RO-390-FF product is a premier membrane for evaporator condensate polishing. RO-390-FF has more active area than competitive elements to maximize performance and reduce capital cost by requiring the fewest elements for polishing applications. All materials of construction are compliant with U.S. Food & Drug Administration indirect food contact requirements and are suitable for use in food processing applications in the U.S. DOW™ RO reverse osmosis membrane elements deliver high flux and exceptional quality water for applications requiring sanitary grade membrane elements.

  Used In:

  Evaporator Condensate polishing

  Sanitary applications

  Advantages:

  High flux rates

  Full-fit design

  Consistent quality from automated rolling

  FilmTec performance and quality

 

请点击下载:陶氏FILMTEC™ RO-390-FF产品技术手册